Tracker Guide V-16 Laker DLX Tiller

Works hard. Fishes hard.

Welcome to our only all-welded Deep V utility boat package.

Depending on your needs, the TRACKER® Guide V-16 Laker DLX Tiller is ready to work hard or play hard.

Share This Boat

Overview

2014 TRACKER Guide V-16 Laker DLX T

w/ 40 ELHPT FourStroke Motor and Trailer


 

Specifications
Length 16'
Bottom width 60"
Max. recommended HP 40 HP
Package width 6' 8''
Fuel capacity 6 Gallons
Deadrise 8 Degrees
Beam 74"
Approx. weight 608 Lbs.
Approx. package weight 1429 Lbs.
Max. person capacity 4 Persons
Depth inside 19"
Hull material 0.100 5052 Marine Alloy
Transom height 21"
Max. weight capacity 1100 Lbs.
Max. person weight 600 Lbs.
Towing length 21' 6''
Storage length 18'



 

Selected Options
Additional options were not selected.


 

Standard Features
Comfort, Convenience & Peace of Mind
Limited lifetime hull warranty
Bow & stern eyes
 
Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Construction & Exterior
All-welded, 2-piece .100 aluminum Deep V hull w/8° deadrise, wide beam & stable bottom for a smoother, dryer ride in rough waters
Cool Gray color
Extruded box-beam, corner-braced all-aluminum transom that is welded in to unitize & strengthen the hull
Heavy-duty 1-piece, extruded aluminum gunnels for structural strength & rigidity
Injected, expanding hull foam for extra hull stiffening, flotation & quiet-riding sound insulation
NEW Diamond Coat™ finish w/industry-exclusive powder coat & clearcoat for long-lasting good looks
 
Pressed-in hull performance strakes
Reverse chine hull design
Transom motor-mounting plate for increased strength & durability
Welded-in longitudinal stringer system for full-length support of the running surface
All-welded, unitized construction & interior components contribute to structural integrity
Electrical
Interstate® cranking battery
Pre-wired for optional trolling motor
 
Navigation lights
Interior
Movable fishing chair
Fixed driving-position chair
Non-skid vinyl surface throughout
Oversized raised bow deck
 
Raised port & starboard aft platforms
Bow pedestal base location
Top-loading lockable port side rod box for rods to 7-1/2' (2.29 m)
Livewell Systems
15-gal. (56.78 L) aerated bow livewell w/bait bucket holder
 
Trailer
NEW 13" wheels w/radial tires
Factory-matched drive-on trailer
All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
Powder-coated steel w/GALVASHIELD II corrosion protection
EZ lube hubs for complete lubrication
 
Folding tongue jack w/swivel wheel
Nylon tie-down straps
Carpeted bunks & fender boards
Outboard motor support
Submersible lights
Trolling Motor
Pre-wired to accept optional trolling motor
 
NEW trolling motor foot pedal storage keeps wiring from underfoot 

Description

Works hard. Fishes hard.

Welcome to our only all-welded Deep V utility boat package.

Depending on your needs, the TRACKER® Guide V-16 Laker DLX Tiller is ready to work hard or play hard.

Its flat, vinyl-covered floor is ready to take on people, pets or a payload. You'll also find raised fishing decks both fore and aft—with a base for an optional fishing seat on the bow deck. Port, there's a top-loading rod box to secure your gear. The open layout allows for maximum fishability.

And the VERSATRACK® gunnel mounting system is ready to accept fishing or hunting accessories.

Complete with a Mercury® FourStroke, GALVASHIELD®-protected trailer and the Diamond Coat™ finish, the Guide V-16 Laker DLX T is rugged and ready. 

  • The Best Factory Warranty in Aluminum Boats
  • Diamond Coat™ finish w/exclusive powder coat & clearcoat for a 3x harder finish, 70% longer-lasting shine & 20x longer-lasting color
  • All-welded, 2-piece .100 aluminum Deep V hull
  • 8° deadrise, wide beam & stable bottom
  • Port & starboard aft platforms & driver's seat
  • 15-gal. (56.78 L) bow aerated livewell w/bait bucket holder
  • VERSATRACK® accessory channel in gunnels
  • Oversized bow storage area
  • Top-loading port rod box
  • Oversized raised bow deck
  • Bow pedestal base location
  •  Custom matched trailer w/Super Lube hubs & welded frame w/GALVASHIELD® protection

Specifications

 

Length 16'
Bottom width 60"
Max. recommended HP 40 HP
Package width 6' 8''
Fuel capacity 6 Gallons
Deadrise 8 Degrees
Beam 74"
Approx. weight 608 Lbs.
Approx. package weight 1429 Lbs.
Max. person capacity 4 Persons
Depth inside 19"
Hull material 0.100 5052 Marine Alloy
Transom height 21"
Max. weight capacity 1100 Lbs.
Max. person weight 600 Lbs.
Towing length 21' 6''
Storage length  

Power / Motor

Motor info coming soon!

Options Features

Standard Features
 
Comfort, Convenience & Peace of Mind

 

Limited lifetime hull warranty
Bow & stern eyes
Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Construction & Exterior

 

All-welded, 2-piece .100 aluminum Deep V hull w/8° deadrise, wide beam & stable bottom for a smoother, dryer ride in rough waters
Cool Gray color
Extruded box-beam, corner-braced all-aluminum transom that is welded in to unitize & strengthen the hull
Heavy-duty 1-piece, extruded aluminum gunnels for structural strength & rigidity
Injected, expanding hull foam for extra hull stiffening, flotation & quiet-riding sound insulation
NEW Diamond Coat™ finish w/industry-exclusive powder coat & clearcoat for long-lasting good looks
Pressed-in hull performance strakes
Reverse chine hull design
Transom motor-mounting plate for increased strength & durability
Welded-in longitudinal stringer system for full-length support of the running surface
All-welded, unitized construction & interior components contribute to structural integrity
Electrical

 

Interstate® cranking battery
Pre-wired for optional trolling motor
Navigation lights
Interior

 

Movable fishing chair
Fixed driving-position chair
Non-skid vinyl surface throughout
Oversized raised bow deck
Raised port & starboard aft platforms
Bow pedestal base location
Top-loading lockable port side rod box for rods to 7-1/2' (2.29 m)
Livewell Systems

 

15-gal. (56.78 L) aerated bow livewell w/bait bucket holder
Trailer

 

NEW 13" wheels w/radial tires
Factory-matched drive-on trailer
All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
Powder-coated steel w/GALVASHIELD II corrosion protection
EZ lube hubs for complete lubrication
Folding tongue jack w/swivel wheel
Nylon tie-down straps
Carpeted bunks & fender boards
Outboard motor support
Submersible lights
Trolling Motor

 

Pre-wired to accept optional trolling motor
NEW trolling motor foot pedal storage keeps wiring from underfoot 
 
Options
 
Functional
VERSATRACK® 3-rod holder (price shown does not include freight & dealer installation) $ 70
VERSATRACK® 4-rod holder kit (price shown does not include freight & dealer installation) $ 65
VERSATRACK® cutting board (price shown does not include freight & dealer installation) $ 85
VERSATRACK® downrigger bracket (price shown does not include freight & dealer installation) $ 110
VERSATRACK® drink holder (price shown does not include freight & dealer installation) $ 45
VERSATRACK® tackle tray (price shown does not include freight & dealer installation) $ 115
VERSATRACK® tool holder (price shown does not include freight & dealer installation) $ 45
Trailer
Brake upgrade $ 560
Dealer installed option pricing does not include labor for installation.
See your dealer for more details. 

Promotions

Promotions info coming soon!